-
Intelligent 2 Axis Stepper Motor Drive R42X2
Multi-axis automation equipment is often required to reduce space and save the cost.R42X2 is the first two-axis special drive developed by Rtelligent in domesitic market.
R42X2 can independently drive two 2-phase stepper motors up to 42mm frame size. The two-axis micro-stepping and current must be set to the same.
• peed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• Signal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
-
Intelligent 2 Axis Stepper Drive R60X2
Multi-axis automation equipment is often required to reduce space and save the cost. R60X2 is the first two-axis special drive developed by Rtelligent in domestic market.
R60X2 can independently drive two 2-phase stepper motors up to 60mm frame size. The two-axis micro-stepping and current can be set separately.
• Pulse mode: PUL&DIR
• Signal level: 24V default, R60X2-5V is required for 5V.
• Typical applications: dispenser, soldering machine, multi-axis test equipment.
-
3 Axis Digital Stepper Drive R60X3
Three-axis platform equipment often has the need to reduce space and save cost. R60X3/3R60X3 is the first three-axis special drive developed by Rtelligent in dometic market.
R60X3/3R60X3 can independently drive three 2-phase/3-phase stepper motors up to 60mm frame size. The three-axis micro-stepping and current are independently adjustable.
• Pulse mode: PUL&DIR
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Typical applications: dispenser, soldering
• machine, engraving machine,multi-axis test equipment.
-
Digital Stepper Motor Driver R86mini
Compared with R86, the R86mini digital two-phase stepper drive adds alarm output and USB debugging ports. smaller
size, easier to use.
R86mini is used to drive two-phase stepper motors base below 86mm
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 24~100V DC or 18~80V AC; 60V AC recommended.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
Digital Stepper Product Driver R110PLUS
The R110PLUS digital 2-phase stepper drive is based on 32-bit DSP platform, with built-in micro-stepping technology &
auto tuning of parameters, featuring of low noise,low vibration, low heating and high-speed high torque output.It can fully play the performance of two-phase high-voltage stepper motor.
R110PLUS V3.0 version added the DIP matching motor parameters function, can drive 86/110 two-phase stepper motor.
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC.
• Power voltage: 110~230V AC; 220V AC recommended, with superior high-speed performance.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
One -drive-two Stepper Drive R42-D
R42-D is a customized drive for two-axis synchronization application
In conveying equipment, there are often two – axis synchronization application requirements.
Speed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• ignal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
-
One -drive-two Stepper Drive R60-D
Two-axis synchronization appication is often required on the conveying equipment. R60-D is the two-axis synchronization
specific drive customized by Rtelligent.
Speed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• Signal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
• Using the TI delicated dual-core DSP chip, R60-D drives the two-axis motor independently to avoid the interference whthin
• the back electromotive force and achieve independent operation and synchronized movement.
-
Advanced Pulse Control Digital Stepper Drive R86
Based on the new 32-bit DSP platform and adopting the micro-stepping technology and PID current control algorithm
design, Rtelligent R series stepper drive surpasses the performance of common analog stepper drive comprehensively.
The R86 digital 2-phase stepper drive is based on 32-bit DSP platform,with built-in micro-stepping technology & auto
tuning of parameters. The drive features low noise, low vibration, low heating and high-speed high torque output.
It is used to drive two-phase stepper motors base below 86mm
• Pulse mode: PUL&DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 24~100V DC or 18~80V AC; 60V AC recommended.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment, etc.
-
Advanced Pulse Control Digital Stepper Driver R130
The R130 digital 2-phase stepper drive is based on 32-bit DSP platform, with built-in micro-stepping technology & auto
tuning of parameters, featuring of low noise,low vibration, low heating and high-speed high torque output. It can be used
in most applications of stepper motor.
R130 is used to drive two-phase stepper motors base below 130mm
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 110~230V AC;
• Typical applications: engraving machine, cutting machine, screen printing equipment, CNC machine, automatic assembly
• equipment, etc.
-
High Performance 5 Phase Digital Stepper Drive 5R60
5R60 digital five-phase stepper drive is based on TI 32-bit DSP platform and integrated with the micro-stepping technology
and the patented five-phase demodulation algorithm. With the features of low resonance at low speed, small torque ripple
and high precision, it allows the five-phase stepper motor to deliver full performance benefits.
• Pulse mode: default PUL&DIR
• Signal level: 5V, PLC application requires string 2K resistor.
• Power supply: 18-50VDC, 36 or 48V recommended.
• Typical applications：dispenser, wire-cut electrical discharge machine, engraving machine, laser cutting machine,
• semiconductor equipment, etc
