-
Intelligent 2 Axis Stepper Motor Drive R42X2
Multi-axis automation equipment is often required to reduce space and save the cost.R42X2 is the first two-axis special drive developed by Rtelligent in domesitic market.
R42X2 can independently drive two 2-phase stepper motors up to 42mm frame size. The two-axis micro-stepping and current must be set to the same.
• peed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• Signal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
-
Intelligent 2 Axis Stepper Drive R60X2
Multi-axis automation equipment is often required to reduce space and save the cost. R60X2 is the first two-axis special drive developed by Rtelligent in domestic market.
R60X2 can independently drive two 2-phase stepper motors up to 60mm frame size. The two-axis micro-stepping and current can be set separately.
• Pulse mode: PUL&DIR
• Signal level: 24V default, R60X2-5V is required for 5V.
• Typical applications: dispenser, soldering machine, multi-axis test equipment.
-
3 Axis Digital Stepper Drive R60X3
Three-axis platform equipment often has the need to reduce space and save cost. R60X3/3R60X3 is the first three-axis special drive developed by Rtelligent in dometic market.
R60X3/3R60X3 can independently drive three 2-phase/3-phase stepper motors up to 60mm frame size. The three-axis micro-stepping and current are independently adjustable.
• Pulse mode: PUL&DIR
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Typical applications: dispenser, soldering
• machine, engraving machine,multi-axis test equipment.
-
One -drive-two Stepper Drive R42-D
R42-D is a customized drive for two-axis synchronization application
In conveying equipment, there are often two – axis synchronization application requirements.
Speed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• ignal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
-
One -drive-two Stepper Drive R60-D
Two-axis synchronization appication is often required on the conveying equipment. R60-D is the two-axis synchronization
specific drive customized by Rtelligent.
Speed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• Signal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
• Using the TI delicated dual-core DSP chip, R60-D drives the two-axis motor independently to avoid the interference whthin
• the back electromotive force and achieve independent operation and synchronized movement.
