-
Digital Stepper Motor Driver R86mini
Compared with R86, the R86mini digital two-phase stepper drive adds alarm output and USB debugging ports. smaller
size, easier to use.
R86mini is used to drive two-phase stepper motors base below 86mm
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 24~100V DC or 18~80V AC; 60V AC recommended.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
Digital Stepper Product Driver R110PLUS
The R110PLUS digital 2-phase stepper drive is based on 32-bit DSP platform, with built-in micro-stepping technology &
auto tuning of parameters, featuring of low noise,low vibration, low heating and high-speed high torque output.It can fully play the performance of two-phase high-voltage stepper motor.
R110PLUS V3.0 version added the DIP matching motor parameters function, can drive 86/110 two-phase stepper motor.
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC.
• Power voltage: 110~230V AC; 220V AC recommended, with superior high-speed performance.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
Advanced Pulse Control Digital Stepper Driver R130
The R130 digital 2-phase stepper drive is based on 32-bit DSP platform, with built-in micro-stepping technology & auto
tuning of parameters, featuring of low noise,low vibration, low heating and high-speed high torque output. It can be used
in most applications of stepper motor.
R130 is used to drive two-phase stepper motors base below 130mm
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 110~230V AC;
• Typical applications: engraving machine, cutting machine, screen printing equipment, CNC machine, automatic assembly
• equipment, etc.
-
2 Phase Open Loop Stepper Drive R42
Based on the new 32-bit DSP platform and adopting the micro-stepping technology and PID current control algorithm design, Rtelligent R series stepper drive surpasses the performance of common analog stepper drive comprehensively.
The R42 digital 2-phase stepper drive is based on 32-bit DSP platform,with built-in micro-stepping technology& auto tuning of parameters. The drive features low noise, low vibration and low heating.
• Pulse mode: PUL&DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 18-48V DC supply; 24 or 36V recommended.
• Typical applications: marking machine, soldering machine, laser, 3D printing, visual localization, automatic assembly equipment.
• etc. -
Classic 2 Phase Open Loop Stepper Drive R60
Based on the new 32-bit DSP platform and adopting the micro-stepping technology and PID current control algorithm design, Rtelligent R series stepper drive surpasses the performance of common analog stepper drive comprehensively. The R60 digital 2-phase stepper drive is based on 32-bit DSP platform,with built-in micro-stepping technology & auto tuning of parameters. The drive features low noise, low vibration, low heating and high-speed high torque output. It is used to drive two-phase stepper motors base below 60mm • Pulse mode: PUL&DIR • Signal level: 3.3~24V compatible; series resistance not required for the application of PLC. • Power voltage: 18-50V DC supply; 24 or 36V recommended. • Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment, etc.
-
Advanced Pulse Control Digital Stepper Drive R86
Based on the new 32-bit DSP platform and adopting the micro-stepping technology and PID current control algorithm design, Rtelligent R series stepper drive surpasses the performance of common analog stepper drive comprehensively.
The R86 digital 2-phase stepper drive is based on 32-bit DSP platform,with built-in micro-stepping technology & auto tuning of parameters. The drive features low noise, low vibration, low heating and high-speed high torque output.
It is used to drive two-phase stepper motors base below 86mm
• Pulse mode: PUL&DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 24~100V DC or 18~80V AC; 60V AC recommended.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment, etc.
-
IO Speed Control Switch Stepper Drive R60-IO
IO series switch stepper drive, with built-in S-type acceleration and deceleration pulse train, only need switch to trigger motor start and stop. Compared with speed regulating motor, IO series of switching stepper drive has the characteristics of stable start and stop, uniform speed, which can simplify the electrical design of engineers.
• Control mode: IN1.IN2
• Speed setting: DIP SW5-SW8
• Signal level: 3.3-24V Compatiable
• Typical appications: conveying equipment, inspection converyor, PCB loader
-
Switching Stepper Driver Series R86IOS
Featuring built-in S-curve acceleration/deceleration pulse generation, this driver requires only simple ON/OFF switch signals to control motor start/stop. Compared to speed-regulation motors, the IO Series offers:
✓ Smoother acceleration/braking (reduced mechanical shock)
✓ More consistent speed control (eliminates step loss at low speed)
✓ Simplified electrical design for engineers
Key Features:
●Low-speed vibration suppression algorithm
● Sensorless stall detection (no additional hardware required)
● Phase-loss alarm function
● Isolated 5V/24V control signal interfaces
● Three pulse command modes:
Pulse + Direction
Dual-pulse (CW/CCW)
Quadrature (A/B phase) pulse
-
Switching Stepper Driver Series R60IOS
Featuring built-in S-curve acceleration/deceleration pulse generation, this driver requires only simple ON/OFF switch signals to control motor start/stop. Compared to speed-regulation motors, the IO Series offers:
✓ Smoother acceleration/braking (reduced mechanical shock)
✓ More consistent speed control (eliminates step loss at low speed)
✓ Simplified electrical design for engineers
Key Features:
●Low-speed vibration suppression algorithm
● Sensorless stall detection (no additional hardware required)
● Phase-loss alarm function
● Isolated 5V/24V control signal interfaces
● Three pulse command modes:
Pulse + Direction
Dual-pulse (CW/CCW)
Quadrature (A/B phase) pulse
-
Switching Stepper Driver Series R42IOS
Featuring built-in S-curve acceleration/deceleration pulse generation, this driver requires only simple ON/OFF switch signals to control motor start/stop. Compared to speed-regulation motors, the IO Series offers:
✓ Smoother acceleration/braking (reduced mechanical shock)
✓ More consistent speed control (eliminates step loss at low speed)
✓ Simplified electrical design for engineers
Key Features:
●Low-speed vibration suppression algorithm
● Sensorless stall detection (no additional hardware required)
● Phase-loss alarm function
● Isolated 5V/24V control signal interfaces
● Three pulse command modes:
Pulse + Direction
Dual-pulse (CW/CCW)
Quadrature (A/B phase) pulse
-
Space-Saving, Cost-Effective 3 Axis Digital Stepper Drive R60X3
Designed specifically for three-axis positioning platforms, the Rtelligent R60X3 offers a compact, integrated solution that reduces equipment footprint and lowers overall system cost. As a pioneering tri-axis dedicated driver in the industry, it independently drives up to three two-phase stepper motors within frame size 60mm, with fully adjustable microstepping and current settings per axis.
Based on Rtelligent S-Series algorithm platform,It is ideal for applications requiring compact multi-axis coordination—such as precision assembly, small robotics, lab automation, and compact CNC systems—where space optimization and cost efficiency are critical.
-
3 Axis Digital Stepper Drive R60X3
Three-axis platform equipment often has the need to reduce space and save cost. R60X3/3R60X3 is the first three-axis special drive developed by Rtelligent in domestic market.
R60X3/3R60X3 can independently drive three 2-phase/3-phase stepper motors up to 60mm frame size. The three-axis micro-stepping and current are independently adjustable.
• Pulse mode: PUL&DIR
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Typical applications: dispenser, soldering machine, engraving machine,multi-axis test equipment.