-
2 Phase Open Loop Stepper Drive R60S Series
The R-S series is an upgraded version of the open-loop stepper driver launched by Rtelligent, and the product design idea is derived from the our experience accumulation in the field of stepper drive over the years. By using a new architecture and algorithm, the new generation of stepper driver effectively reduces the low-speed resonance amplitude of the motor, has a stronger anti-interference ability, while supporting non-inductive rotation detection, phase alarm and other functions, support a variety of pulse command forms, multiple dip Settings.
-
Pulse Control 2 Phase Closed Loop Stepper Drive T60Plus
T60PLUS closed loop stepper drive, with encoder Z signal input and output functions. It integrates a miniUSB communication port for easy debugging of related parameters.
T60PLUS matches closed loop stepper motors with Z signal below 60mm
• Pulse mode: PUL&DIR/CW&CCW
• Signal level: 5V/24V
• l Power voltage: 18-48VDC, and 36 or 48V recommended.
• Typical applications: Auto-screwdriving machine, servo dispenser, wire-stripping machine, labeling machine, medical detector,
• electronic assembly equipment etc.
-
Closed Loop Fieldbus Stepper Drive NT60
485 fieldbus stepper drive NT60 is based on RS-485 network to run Modbus RTU protocol. The intelligent motion control
function is integrated, and with external IO control, it can complete functions such as fixed position/fixed speed/multi
position/auto-homing
NT60 matches open loop or closed loop stepper motors below 60mm
• Control mode: fixed length/fixed speed/homing/multi-speed/multi-position
• Debugging software: RTConfigurator (multiplexed RS485 interface)
• Power voltage: 24-50V DC
• Typical applications: single axis electric cylinder, assembly line, connection table, multi-axis positioning platform, etc
-
Intelligent 2 Axis Stepper Motor Drive R42X2
Multi-axis automation equipment is often required to reduce space and save the cost.R42X2 is the first two-axis special drive developed by Rtelligent in domesitic market.
R42X2 can independently drive two 2-phase stepper motors up to 42mm frame size. The two-axis micro-stepping and current must be set to the same.
• peed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• Signal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
-
Intelligent 2 Axis Stepper Drive R60X2
Multi-axis automation equipment is often required to reduce space and save the cost. R60X2 is the first two-axis special drive developed by Rtelligent in domestic market.
R60X2 can independently drive two 2-phase stepper motors up to 60mm frame size. The two-axis micro-stepping and current can be set separately.
• Pulse mode: PUL&DIR
• Signal level: 24V default, R60X2-5V is required for 5V.
• Typical applications: dispenser, soldering machine, multi-axis test equipment.
-
3 Axis Digital Stepper Drive R60X3
Three-axis platform equipment often has the need to reduce space and save cost. R60X3/3R60X3 is the first three-axis special drive developed by Rtelligent in dometic market.
R60X3/3R60X3 can independently drive three 2-phase/3-phase stepper motors up to 60mm frame size. The three-axis micro-stepping and current are independently adjustable.
• Pulse mode: PUL&DIR
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Typical applications: dispenser, soldering
• machine, engraving machine,multi-axis test equipment.
-
Digital Stepper Motor Driver R86mini
Compared with R86, the R86mini digital two-phase stepper drive adds alarm output and USB debugging ports. smaller
size, easier to use.
R86mini is used to drive two-phase stepper motors base below 86mm
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 24~100V DC or 18~80V AC; 60V AC recommended.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
Digital Stepper Product Driver R110PLUS
The R110PLUS digital 2-phase stepper drive is based on 32-bit DSP platform, with built-in micro-stepping technology &
auto tuning of parameters, featuring of low noise,low vibration, low heating and high-speed high torque output.It can fully play the performance of two-phase high-voltage stepper motor.
R110PLUS V3.0 version added the DIP matching motor parameters function, can drive 86/110 two-phase stepper motor.
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC.
• Power voltage: 110~230V AC; 220V AC recommended, with superior high-speed performance.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
PLC product presentation
The RX3U series controller is a small PLC developed by Rtelligent technology, Its command specifications are fully compatible with Mitsubishi FX3U series controllers, and its features include supporting 3 channels of 150kHz high-speed pulse output, and supporting 6 channels of 60K single-phase high-speed counting or 2 channels of 30K AB-phase high-speed counting.
-
Hybrid 2 Phase Closed Loop Stepper Drive DS86
DS86 digital display closed-loop stepper drive, based on a 32-bit digital DSP platform, with built-in vector control technology and servo demodulation function. The DS stepper servo system has the characteristics of low noise and low heating.
DS86 is used to drive the two-phase closed-loop motor below 86mm
• Pulse mode: PUL&DIR/CW&CCW
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Power voltage: 24-100VDC or 18-80VAC, and 75VAC recommended.
• Typical applications: Auto-screwdriving machine, wire-stripping machine, labeling machine, engraving machine, electronic assembly equipment etc.
-
Pulse Control 3 Phase Closed Loop Stepper Drive NT110
NT110 digital display 3 phase closed loop stepper drive, based on 32-bit digital DSP platform, built-in vector control technology and servo demodulation function, makes the closed loop stepper system have the characteristics of low noise and low heat.
NT110 is used to drive 3 phase 110mm and 86mm closed loop stepper motors,RS485 communication is available.
• Pulse mode: PUL&DIR/CW&CCW
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Power voltage: 110-230VAC, and 220VAC is recommended.
• Typical applications: welding machine, wire-stripping machine, labeling machine, carving machine, electronic assembly equipment etc.
-
One -drive-two Stepper Drive R42-D
R42-D is a customized drive for two-axis synchronization application
In conveying equipment, there are often two – axis synchronization application requirements.
Speed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• ignal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
