-
DRV Series Low Voltage Servo Driver User Manual
Low-voltage servo is a servo motor designed to be suitable for low-voltage DC power supply applications. DRV series low voltage servo system supports CANopen, EtherCAT, 485 three communication modes control, network connection is possible. DRV series low-voltage servo drives can process encoder position feedback to achieve more accurate current and position control.
• Power range up to 1.5kw
• Encoder resolution up to 23bits
• Excellent anti-interference ability
• Better hardware and high reliability
• With brake output
-
DRV Series EtherCAT Fieldbus User manual
Low-voltage servo is a servo motor designed to be suitable for low-voltage DC power supply applications. DRV series low voltage servo system supports CANopen, EtherCAT, 485 three communication modes control, network connection is possible. DRV series low-voltage servo drives can process encoder position feedback to achieve more accurate current and position control.
• Power range up to 1.5kw
• High speed response frequency,shorter
• positioning time
• Comply with CiA402 standard
• Support CSP/CSV/CST/PP/PV/PT/HM mode
• With brake output
-
Low Voltage DC Servo Drive with CANopen Series DRV400C/DRV750C/DRV1500C
Low-voltage servo is a servo motor designed to be suitable for low-voltage DC power supply applications. DRV series lowvoltage servo system supports CANopen, EtherCAT, 485 three communication modes control, network connection is possible. DRV series low-voltage servo drives can process encoder position feedback to achieve more accurate current and position control.
• Power range up to 1.5kw
• High speed response frequency, shorter
• positioning time
• Comply with CiA402 standard
• Fast baud rate up IMbit/s
• With brake output
-
Cost-Effective AC Servo Drive RS400CR / RS400CS/ RS750CR /RS750CS
RS series AC servo is a general servo product line developed by Rtelligent, covering the motor power range of 0.05 ~ 3.8kw. RS series supports ModBus communication and internal PLC function, and RSE series supports EtherCAT communication. RS series servo drive has a good hardware and software platform to ensure that it can be very suitable for fast and accurate position, speed, torque control applications.
• High stability, Easy and convenient debugging
• Type-c: Standard USB, Type-C Debug interface
• RS-485: with standard USB communication interface
• New front interface to optimize wiring layout
• 20Pin press-type control signal terminal without soldering wire, easy and fast operation
-
Intelligent 2 Axis Stepper Motor Drive R42X2
Multi-axis automation equipment is often required to reduce space and save the cost.R42X2 is the first two-axis special drive developed by Rtelligent in domesitic market.
R42X2 can independently drive two 2-phase stepper motors up to 42mm frame size. The two-axis micro-stepping and current must be set to the same.
• peed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• Signal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
-
PLC product presentation
The RX3U series controller is a small PLC developed by Rtelligent technology, Its command specifications are fully compatible with Mitsubishi FX3U series controllers, and its features include supporting 3 channels of 150kHz high-speed pulse output, and supporting 6 channels of 60K single-phase high-speed counting or 2 channels of 30K AB-phase high-speed counting.
-
Hybrid 2 Phase Closed Loop Stepper Drive DS86
DS86 digital display closed-loop stepper drive, based on a 32-bit digital DSP platform, with built-in vector control technology and servo demodulation function. The DS stepper servo system has the characteristics of low noise and low heating.
DS86 is used to drive the two-phase closed-loop motor below 86mm
• Pulse mode: PUL&DIR/CW&CCW
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Power voltage: 24-100VDC or 18-80VAC, and 75VAC recommended.
• Typical applications: Auto-screwdriving machine, wire-stripping machine, labeling machine, engraving machine, electronic assembly equipment etc.
-
Pulse Control 3 Phase Closed Loop Stepper Drive NT110
NT110 digital display 3 phase closed loop stepper drive, based on 32-bit digital DSP platform, built-in vector control technology and servo demodulation function, makes the closed loop stepper system have the characteristics of low noise and low heat.
NT110 is used to drive 3 phase 110mm and 86mm closed loop stepper motors,RS485 communication is available.
• Pulse mode: PUL&DIR/CW&CCW
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Power voltage: 110-230VAC, and 220VAC is recommended.
• Typical applications: welding machine, wire-stripping machine, labeling machine, carving machine, electronic assembly equipment etc.
-
2 Axis Stepper Drive R42X2
Multi-axis automation equipment is often required to reduce space and save the cost.R42X2 is the first two-axis special drive developed by Rtelligent in domesitic market.
R42X2 can independently drive two 2-phase stepper motors up to 42mm frame size. The two-axis micro-stepping and current must be set to the same.
• Speed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• Signal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
-
2 Axis Stepper Drive R60X2
Multi-axis automation equipment is often required to reduce space and save the cost. R60X2 is the first two-axis special drive developed by Rtelligent in domestic market.
R60X2 can independently drive two 2-phase stepper motors up to 60mm frame size. The two-axis micro-stepping and current can be set separately.
• Pulse mode: PUL&DIR
• Signal level: 24V default, R60X2-5V is required for 5V.
• Typical applications: dispenser, soldering machine, multi-axis test equipment.
-
Switch Stepper Drive Series
IO series switch stepper drive, with built-in S-type acceleration and deceleration pulse train, only need switch to trigger
motor start and stop. Compared with speed regulating motor, IO series of switching stepper drive has the characteristics of stable start and stop, uniform speed, which can simplify the electrical design of engineers.
• ontrol mode: IN1.IN2
• Speed setting: DIP SW5-SW8
• Signal level: 3.3-24V Compatiable
• Typical appications: conveying equipment, inspection converyor, PCB loader
-
Digital Stepper Driver R86mini
Compared with R86, the R86mini digital two-phase stepper drive adds alarm output and USB debugging ports. smaller
size, easier to use.
R86mini is used to drive two-phase stepper motors base below 86mm
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 24~100V DC or 18~80V AC; 60V AC recommended.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
