-
Hybrid 2 Phase Closed Loop Stepper Drive DS86
DS86 digital display closed-loop stepper drive, based on a 32-bit digital DSP platform, with built-in vector control technology and servo demodulation function. The DS stepper servo system has the characteristics of low noise and low heating.
DS86 is used to drive the two-phase closed-loop motor below 86mm
• Pulse mode: PUL&DIR/CW&CCW
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Power voltage: 24-100VDC or 18-80VAC, and 75VAC recommended.
• Typical applications: Auto-screwdriving machine, wire-stripping machine, labeling machine, engraving machine, electronic assembly equipment etc.
-
Pulse Control 3 Phase Closed Loop Stepper Drive NT110
NT110 digital display 3 phase closed loop stepper drive, based on 32-bit digital DSP platform, built-in vector control technology and servo demodulation function, makes the closed loop stepper system have the characteristics of low noise and low heat.
NT110 is used to drive 3 phase 110mm and 86mm closed loop stepper motors,RS485 communication is available.
• Pulse mode: PUL&DIR/CW&CCW
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Power voltage: 110-230VAC, and 220VAC is recommended.
• Typical applications: welding machine, wire-stripping machine, labeling machine, carving machine, electronic assembly equipment etc.
-
Switch Stepper Drive Series
IO series switch stepper drive, with built-in S-type acceleration and deceleration pulse train, only need switch to trigger
motor start and stop. Compared with speed regulating motor, IO series of switching stepper drive has the characteristics of stable start and stop, uniform speed, which can simplify the electrical design of engineers.
• ontrol mode: IN1.IN2
• Speed setting: DIP SW5-SW8
• Signal level: 3.3-24V Compatiable
• Typical appications: conveying equipment, inspection converyor, PCB loader
-
Digital Stepper Driver R86mini
Compared with R86, the R86mini digital two-phase stepper drive adds alarm output and USB debugging ports. smaller
size, easier to use.
R86mini is used to drive two-phase stepper motors base below 86mm
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 24~100V DC or 18~80V AC; 60V AC recommended.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
Digital Stepper Driver R110PLUS
The R110PLUS digital 2-phase stepper drive is based on 32-bit DSP platform, with built-in micro-stepping technology &
auto tuning of parameters, featuring of low noise,low vibration, low heating and high-speed high torque output.It can fully play the performance of two-phase high-voltage stepper motor.
R110PLUS V3.0 version added the DIP matching motor parameters function, can drive 86/110 two-phase stepper motor.
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC.
• Power voltage: 110~230V AC; 220V AC recommended, with superior high-speed performance.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
Inductive Speed Regulation Brushless Drive
S series Inductive speed regulation brushless Drives, based on Hallless FOC control technology, can drive various brushless motors. The drive automatically tunes and matches the corresponding motor, supports PWM and potentiometer speed regulation functions, and can also run through 485 networking, which is suitable for highperformance brushless motor control occasions
• Using FOC magnetic field positioning technology and SVPWM technology
• Support potentiometer speed regulation or PWM speed regulation
• 3 digital input/1 digital output interface with configurable function
• Power supply voltage: 18VDC~48VDC; Recommended 24VDC~48VDC
