-
Integrated Stepper Motor IRD57/ITD57 Series
IR/IT series, developed by Rtelligent, is an integrated universal stepper motor that perfectly combines motor, encoder, and driver into one compact unit. With multiple control modes available, it saves installation space, simplifies wiring, and reduces labor costs.
Built with high-performance drives and motors, Integrated Motors deliver robust power in a high-quality, space-efficient design. They help machine builders minimize footprint, reduce cabling, enhance reliability, eliminate motor wiring time, and lower overall system costs.
-
UL Certified Two Phase Open loop Stepper Drive USR2556
The USR2556 is an upgraded version of the open loop stepper driver launched by Rtelligent, and the product design idea is derived from our experience accumulation in the field of stepper drive over the years. By using a new architecture and algorithm, the new generation of stepper driver effectively reduces the low-speed resonance amplitude of the motor, has a stronger anti-interference ability, while supporting non-inductive rotation detection, phase alarm and other functions, support a variety of pulse command forms, multiple dip settings.
-
UL Certified Fieldbus Closed loop Stepper Drive UST2556E
The EtherCAT fieldbus stepper drive UST2556E is based on the CoE standard framework and complies with the CiA402 standard. The data transmission rate is up to 100Mb/s, and supports various network topologies.
UST2556E matches closed loop stepper motors below 60mm.
● Control mode: PP, PV, CSP, Homing mode, etc
● Power supply voltage: 18-80VDC
● Input and output: 4-channel 24V common anode inputs; 2-channel optocoupler isolated outputs
● Typical applications: assembly lines, lithium battery equipment, solar equipment, 3C electronic equipment, etc
-
UL Certified Fieldbus Open loop Stepper Drive USR2556E
The EtherCAT fieldbus stepper drive USR2556E is based on the CoE standard framework and complies with the CiA402 standard. The data transmission rate is up to 100Mb/s, and supports various network topologies.
USR2556E matches open loop stepper motors below 60mm.
● Control mode: PP, PV, CSP, Homing mode, etc
● Power supply voltage: 18-80VDC
● Input and output: 2-channel differential inputs/4-channel 24V common anode inputs;
2-channel optocoupler isolated outputs
● Typical applications: assembly lines, lithium battery equipment, solar equipment, 3C electronic equipment, etc
-
UL Certified Fieldbus Closed Loop Stepper Drive UST2556M
Field bus stepper drive USD2556M is based on RS-485 network to run Modbus RTU protocol. The intelligent motion control
function is integrated, and with external IO control, it can complete functions such as fixed position/fixed speed/multi position/auto-homing
UST2556M matches open loop or closed loop stepper motors below 60mm
● Control mode: fixed length/fixed speed/homing/multi-speed/multi-position
● Debugging software: RTConfigurator (multiplexed RS485 interface)
● Power voltage: 24-50V DC
● Typical applications: single axis electric cylinder, assembly line, connection table, multi-axis positioning platform, etc
-
PLC product presentation
The RX3U series controller is a small PLC developed by Rtelligent technology, Its command specifications are fully compatible with Mitsubishi FX3U series controllers, and its features include supporting 3 channels of 150kHz high-speed pulse output, and supporting 6 channels of 60K single-phase high-speed counting or 2 channels of 30K AB-phase high-speed counting.
-
Switch Stepper Drive Series
IO series switch stepper drive, with built-in S-type acceleration and deceleration pulse train, only need switch to trigger
motor start and stop. Compared with speed regulating motor, IO series of switching stepper drive has the characteristics of stable start and stop, uniform speed, which can simplify the electrical design of engineers.
• ontrol mode: IN1.IN2
• Speed setting: DIP SW5-SW8
• Signal level: 3.3-24V Compatiable
• Typical appications: conveying equipment, inspection converyor, PCB loader
-
Digital Stepper Driver R86mini
Compared with R86, the R86mini digital two-phase stepper drive adds alarm output and USB debugging ports. smaller
size, easier to use.
R86mini is used to drive two-phase stepper motors base below 86mm
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 24~100V DC or 18~80V AC; 60V AC recommended.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
Digital Stepper Driver R110PLUS
The R110PLUS digital 2-phase stepper drive is based on 32-bit DSP platform, with built-in micro-stepping technology &
auto tuning of parameters, featuring of low noise,low vibration, low heating and high-speed high torque output.It can fully play the performance of two-phase high-voltage stepper motor.
R110PLUS V3.0 version added the DIP matching motor parameters function, can drive 86/110 two-phase stepper motor.
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC.
• Power voltage: 110~230V AC; 220V AC recommended, with superior high-speed performance.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
Inductive Speed Regulation Brushless Drive
S series Inductive speed regulation brushless Drives, based on Hallless FOC control technology, can drive various brushless motors. The drive automatically tunes and matches the corresponding motor, supports PWM and potentiometer speed regulation functions, and can also run through 485 networking, which is suitable for highperformance brushless motor control occasions
• Using FOC magnetic field positioning technology and SVPWM technology
• Support potentiometer speed regulation or PWM speed regulation
• 3 digital input/1 digital output interface with configurable function
• Power supply voltage: 18VDC~48VDC; Recommended 24VDC~48VDC